Microcement Furniture
THE BULLETPROOF
Your number ONE choice for bathroom/wet areas. Already waterproof BEFORE sealers. Only ONE coat of sealer for walls and 2 for floors. For cleaning purposes only. No need to re-seal every 18 months like all the other brands.
Already pre-mixed in a bucket and ready to apply. No need to mix any nasty powders. READY TO USE No terrible smells. You will definitely enjoy working with this beautiful product.
MICRONE's Characteristics
-
Waterproof
-
2 Versions: Continuous effect Stucco effect
-
Compressive strength
-
Ready-to-use
MICRONE'S PRODUCTS
MICROCEMENT
MICROCEMENT
Microcement of fine texture finish. After adding the toner of the chosen colour you will obtain a smooth decorative surface with or without stucco effect. It is recommended only for vertical and non-trafficable surfaces, since it does not have non-slip properties.
Consumption: 0,5 Kg/m²
Volume: 5 Kg and 10 Kg
micropool
Micropool
Microne Medium has thicker granulometry than Microne Fine. With or without stucco effect. After adding the toner of the chosen colour, the result will be a slightly textured surface, much more resistant and of superior hardness. The grain size provides it with anti-slip properties. It can be applied on a multitude of surfaces, however, its most recommended use is on medium traffic pavements. It can also be applied on Vertical surfaces or walls.
Consumption: 0,6 Kg/m²
Volume: 5 Kg and 10 Kg
waterproof RTU
Waterproof RTU
Microcement of low roughness texture. Without Stucco effect. After adding the toner of the chosen colour you will obtain a decorative finish with a very good planimetry on horizontal surfaces. It stands out for having a greater anti-slip power and for being more resistant and harder than the Medium and Fine. It is recommended for floors and medium traffic pavements. It can also be applied on Vertical surfaces or walls.
Consumption: 1 Kg/m²
Volume: 5 Kg and 10 Kg
THE STRENGTH
The STRONGEST Microcement on the market. 80 MPA. WATERPROOF. Bicomponent.COMPRESSIVE and TENSILE strength is UNMATCHED.Microcement, whose hardness is SUPERIOR to that of polished cement with a mineral appearance. Sealant does not soften the product and the Microcement is not affected by solvents or chemical compounds.
Only ONE coat of varnish is sufficient to prevent dust and stains.MICROROCK surfaces do not fissure or crack and do not stain. It has a high adherence to any support and is specially designed to be applied in high-traffic areas.
MICROROCK's Characteristics
-
Waterproof
-
2 Versions: Continuous effect Stucco effect
-
Compressive strength
-
Ready-to-use
MICROROCK'S PRODUCTS
THE TRUST
Single-Component Microcement.The Microdur line of microcement is characterized by being a single-component coating. It only needs to be mixed with water for hardening. The main difference with respect to those that are combined with resin (Microduo) is that their hardening time is not as long. However, mixing with water and not with resin makes it simpler to apply.Microdur allows you to achieve a very high thickness without the risk of cracking, thanks to its high hardening.With a large amount of product, it is possible to get different textures and even cast shapes and forms with molds.This line is also characterized by being the only one that allows textured coatings, such as for example, the famous concrete formwork effect.
Microdur's Characteristics
-
2 h of product's pot life
-
Stucco effect
-
Compressive strength
-
Water + Powder
