- THE BULLETPROOF. -
Your number ONE choice for bathroom/wet areas. Already waterproof BEFORE sealers. Only ONE coat of sealer for walls and 2 for floors. For cleaning purposes only. No need to re-seal every 18 months like all the other brands.
Already pre-mixed in a bucket and ready to apply. No need to mix any nasty powders. READY TO USE No terrible smells. You will definitely enjoy working with this beautiful product.
MICRONE's Characteristics
Waterproof
2 Versions: Continuous effect Stucco effect
Compressive strength
Ready-to-use
Granulometries
Fine
Medium
Base
MICRONE'S PRODUCTS
FINE
Microcement of fine texture finish. After adding the toner of the chosen colour you will obtain a smooth decorative surface with or without stucco effect. It is recommended only for vertical and non-trafficable surfaces, since it does not have non-slip properties.
Consumption: 0,5 Kg/m²
Volume: 5 Kg and 10 Kg
MEDIUM
Microne Medium has thicker granulometry than Microne Fine. With or without stucco effect. After adding the toner of the chosen colour, the result will be a slightly textured surface, much more resistant and of superior hardness. The grain size provides it with anti-slip properties. It can be applied on a multitude of surfaces, however, its most recommended use is on medium traffic pavements. It can also be applied on Vertical surfaces or walls.
Consumption: 0,6 Kg/m²
Volume: 5 Kg and 10 Kg
BASE
Microcement of low roughness texture. Without Stucco effect. After adding the toner of the chosen colour you will obtain a decorative finish with a very good planimetry on horizontal surfaces. It stands out for having a greater anti-slip power and for being more resistant and harder than the Medium and Fine. It is recommended for floors and medium traffic pavements. It can also be applied on Vertical surfaces or walls.
Consumption: 1 Kg/m²
Volume: 5 Kg and 10 Kg
- THE STRENGTH -
MICROROCK's Characteristics
Waterproof
2 Versions: Continuous effect Stucco effect
Compressive strength
Ready-to-use
Granulometries
Fine
Medium
Base
ThickBase
MICROROCK'S PRODUCTS
FINE
Microcement of fine texture finish. After adding the toner of the chosen colour you will obtain a smooth decorative surface with or without stucco effect. It is recommended for both vertical and horizontal surfaces.
Classified as CT-C40-F10 according to the UNE-EN 13813 standard.
Consumption: 0,5 Kg/m²
Proportion: 10 Kg of Microröck Fine + 1L of hardener
Volume: 5 Kg and 10 Kg
MEDIUM
Microröck Medium has thicker granulometry than Microröck Fine. With or without stucco effect. After adding the toner of the chosen colour, the result will be a slightly textured surface, much more resistant and of superior hardness. The grain size provides it with anti-slip properties. It can be applied on a multitude of surfaces, however, its most recommended use is on high traffic pavements. It can also be applied on Vertical surfaces or walls.
Classified as CT-C40-F10 according to the UNE-EN 13813 standard.
Consumption: 0,6 Kg/m²
Proportion: 10 Kg of Microröck Medium + 1L of hardener
Volume: 5 Kg and 10 Kg
BASE
Microcement with roughness, resistance and hardness superior to Medium. Without Stucco effect. It stands out for its high anti-slip power. After adding the toner of the chosen colour you will get a rough decorative finish, with a high planimetry that allows the product to match very well on horizontal surfaces. It is recommended for floors and extreme traffic pavements. It can also be applied on Vertical surfaces.
Classified according to UNE-EN 13813 as CT-C40-F10.
Consumption: 1 Kg/m²
Proportion: 10 Kg of Microröck Base + 1L of hardener
Volume: 5 Kg and 10 Kg
THICK BASE
Single-component microcement that is used as a previous step for the preparation of microcements Fine, Medium or Base. The regularization of the aggregate is very good due to its size, which allows to obtain a perfect planimetry with a high covering power. It has a very high compressive strength. In case of opting for the application of Microröck Fine, it is convenient to apply one or two coats of Microröck Medium previously to fill the Thick Base. In this way we will need fewer coats of Microröck Fine, so we will get more hardness to compression.
Classified according to UNE-EN 13813 as CT-C40-F10.
Consumption: 1,5 Kg/m²
Proportion: 10 Kg of Microröck Base + 1L of hardener
Volume: 5 Kg and 10 Kg
- THE TRUST -
Microdur's Characteristics
2 h of product's pot life
Stucco effect
Compressive strength
Water + Powder
Granulometries
Fine
Medium
FineBase
Base
ThickBase
MICRODUR'S PRODUCTS
FINE
Microcement of fine texture finish. After adding the toner of the chosen colour you will obtain a smooth decorative surface with stucco effect. It is recommended only for vertical and non-trafficable surfaces, since it does not have non-slip properties.
Classified as CT-C30-F9 according to the UNE-EN 13813 standard.
Consumption: 0,5 Kg/m²
Proportion: 10 Kg of Microdur Fine + 4 L of water
Volume: 10 Kg
REGULAR
Microcement with an intermediate finish, between Fine and Medium. It achieves a more subtle finish (less stucco effect than Fine). After adding the toner of the chosen colour, the result will be a slightly textured surface, much more resistant and of superior hardness. The grain size provides it with anti-slip properties. It can be applied on a multitude of surfaces, however, its most recommended use is on medium traffic pavements. It can also be applied on Vertical surfaces or walls.
Classified as CT-C40-F10 according to the UNE-EN 13813 standard.
Consumption: 0,6 Kg/m²
Proportion: 10 Kg of Microdur Regular + 4 L of water.
Volume: 10 Kg
MEDIUM
Microdur Medium has thicker granulometry than Microdur Regular, which makes its finish more rustic. After adding the toner of the chosen colour, the result will be a slightly textured surface, much more resistant and of superior hardness. The grain size provides it with anti-slip properties. It can be applied on a multitude of surfaces, however, its most recommended use is on medium traffic pavements. It can also be applied on Vertical surfaces or walls.
Classified as CT-C40-F10 according to the UNE-EN 13813 standard.
Consumption: 0,6 Kg/m²
Proportion: 20 Kg of Microdur Medium + 6,5 L of water
Volume: 20 Kg
FINE BASE
Low roughness microcement. After adding the toner of the chosen colour you will get a decorative finish with a very good planimetry on horizontal surfaces. It stands out for having a greater anti-slip power and for being more resistant and harder than the Medium and Fine. It is recommended for pavements and high traffic floors. It can also be applied on Vertical surfaces or walls. It can also be used as a base when a base of smaller granulometry is desired.
Classified as CT-C40-F10 according to the UNE-EN 13813 standard.
Consumption: 1 Kg/m²
Proportion: 20 Kg of Microdur Fine Base + 6 L of water
Volume: 20 Kg